What are the shiny metals
shine is an optical property of a surface to reflect light completely or partially in a specular way. If a surface is not shiny because it reflects light diffusely, this is called Dullness. Just like color, gloss is a property that contributes to the visual appearance of a surface. Shine is a sensory impression and therefore depends on the viewer. In order to make the gloss of surfaces technically comparable, one can use reflectometers Gloss level determine.
shine occurs when both the lighting is bundled and the surface is reflective. As a result, every point on the surface appears differently bright from different viewing angles and light reflections change with the movement of the viewer. A surface also looks very shiny if the brightness of a point in binocular vision differs greatly for each eye. In contrast arises Dullnesswhen the surface reflects the light diffusely or there is global diffuse lighting. In the latter case, it is not possible to distinguish whether the surface is glossy or matt.
In physical terms, gloss is defined as the quotient of the directed and the diffusely reflected portion of the luminous flux falling on a surface. It can be determined quantitatively with gloss meters.
If the color of the reflected light changes with the viewing angle, this is called iridescence.
Mica, glitter, glitter effects are among the special forms of shine, which are due to local, high-gloss, small surface areas, as is also typical for the variously stored crystal surfaces of the minerals of the mica group, but also for ice or for the reflections on finely structured ones Surfaces such as water, or metal foil snippets (glitter) or metal effect pigments in a coating agent such as metallic paints.
Paints and varnishes
- Semi-gloss or semi-gloss
- dull matt
- deep matt
In mineralogy, a distinction is made between in descending order according to the strength of the gloss
- Metallic luster
- Strongest, reflective gloss that only occurs with metals, alloys and some opaque minerals (mainly sulfides) and corresponds approximately to a refractive index of 2.6 to over 3. Most minerals with a metallic sheen are colorless or gray in color with different shades and therefore show gray to silvery reflections such as sperrylite and stibnite. Some "non-ferrous metals" such as copper and gold, but also some minerals such as pyrite (golden yellow), kermesite (red), hibonite (brown) and hematite (black) show a correspondingly colored luster due to their intrinsic color. In addition, thin layers of weathering can lead to iridescent, iridescent shades of color.
- Diamond luster
- Radiant shine that resembles cut diamonds or lead crystals and has a refractive index of around 1.9 to 2.6. Further examples of diamond luster are calomel, linarite, pyrargyrite and zemannite.
- Greasy shine
- Corresponds to the sheen of grease stains on paper and is mostly used to denote cloudy stones with a low refractive index between 1.7 and 1.9. Examples of greasy gloss include gahnite, cerolite and pyrochlore.
- Glass gloss
- Corresponds to the gloss of simple window glass with an average refractive index between 1.5 and 1.6. Depending on the variety, this can vary between 1.3 to 1.9 (limit to diamond gloss). Examples of glass luster include enstatite, lazulite, phenakite and uwarowite.
- (short: pearlescent, also luster): Name for the mixture of surface gloss and opaque depth light, with iridescent effects as it is typical for mother-of-pearl and pearls. Examples of pearlescent luster include brucite and smithsonite.
- Silky gloss
- Surging light as occurs with silk and parallel-fiber minerals or aggregates such as chrysoberyl, tiger's eye and falcon's eye. Minerals with a silky sheen show the well-known "cat's eye effect" when appropriately cut.
- Resin gloss or. Wax gloss
- The model here is the cloudy and less intense gloss of resin or wax with a refractive index similar to that of glass. Amber, opal and flint show, among other things, a resin or wax sheen.
- Description for minerals without a special shine. The breakpoints of otherwise very shiny minerals can also be matt.
Other common descriptions of gloss include semi-metal gloss, porcelain gloss, pitch gloss. Numerous mining names indicate a characteristic sheen of these minerals, such as "lead luster" for galena or "copper luster" for chalcopyrite.
- Walter Schumann: Precious and semi-precious stones. All species and varieties in the world. 1600 unique pieces. 13th revised and expanded edition. BLV Verlags GmbH, Munich and others 2002, ISBN 3-405-16332-3, pp. 48, 49.
- How does ESV work in steam turbines
- What is the t test
- How do I eat tamarind
- What is the purpose of a hypothesis
- Can Chinese do 1 a day
- After the gallbladder was removed, you digested normally
- How often do data scientists use Matlab
- Why are bearings important
- What is a life without sex
- Is Death Stranding a good game
- Is Dilwale Dulhania Le Jayenge overrated
- How dangerous is chlorinated chicken
- How did the Roman army maintain discipline?
- What does NASA say about extraterrestrials
- I could go crazy all of a sudden
- What does Habib Fanny think of Obamacare
- How many feet in a mile
- What are three types of cell functions
- Has China overtaken the US economy
- We can adapt Gmail to our needs
- Do we have male escorts in Mumbai
- What are the positive aspects of being overweight
- Are manta rays dangerous
- What can you cleanse with vinegar